1. 05 Oct, 2009 1 commit
  2. 21 Sep, 2009 1 commit
    • Linus Torvalds's avatar
      Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 · 593968a9
      Linus Torvalds authored
      * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits)
        drm/vgaarb: add VGA arbitration support to the drm and kms.
        drm/radeon: some r420s have a CP race with the DMA engine.
        drm/radeon/r600/kms: rv670 is not DCE3
        drm/radeon/kms: r420 idle after programming GA_ENHANCE
        drm/radeon/kms: more fixes to rv770 suspend/resume path.
        drm/radeon/kms: more alignment for rv770.c with r600.c
        drm/radeon/kms: rv770 blit init called too late.
        drm/radeon/kms: move around new init path code to avoid posting at init
        drm/radeon/r600: fix some issues with suspend/resume.
        drm/radeon/kms: disable VGA rendering engine before taking over VRAM
        drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init().
        drm/radeon/kms: add initial connector properties
        drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.
        drm/radeon/kms: don't fail if we fail to init GPU acceleration
        drm/r600/kms: fixup number of loops per blit calculation.
        drm/radeon/kms: reprogram format in set base.
        drm/radeon: avivo chips have no separate int bit for display
        drm/radeon/r600: don't do interrupts
        drm: fix _DRM_GEM addmap error message
        drm: update crtc x/y when only fb changes
      Fixed up trivial conflicts in firmware/Makefile due to network driver
      (cxgb3) and drm (mga/r128/radeon) firmware being listed next to each
  3. 15 Sep, 2009 1 commit
  4. 30 Aug, 2009 1 commit
    • Ben Hutchings's avatar
      radeon: Use request_firmware() · 9715b36e
      Ben Hutchings authored
      Loosely based on a patch by
      Jaswinder Singh Rajput <jaswinderlinux@gmail.com>.
      KMS support by Dave Airlie <airlied@redhat.com>.
      For Radeon 100- to 500-series, firmware blobs look like:
          struct {
              __be32 datah;
              __be32 datal;
          } cp_ucode[256];
      For Radeon 600-series, there are two separate firmware blobs:
          __be32 me_ucode[PM4_UCODE_SIZE * 3];
          __be32 pfp_ucode[PFP_UCODE_SIZE];
      For Radeon 700-series, likewise:
          __be32 me_ucode[R700_PM4_UCODE_SIZE];
          __be32 pfp_ucode[R700_PFP_UCODE_SIZE];
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
  5. 29 Aug, 2009 1 commit
  6. 27 Aug, 2009 2 commits
  7. 13 Aug, 2009 1 commit
    • Eilon Greenstein's avatar
      bnx2x: Using the new FW · 931b7c1f
      Eilon Greenstein authored
      The new FW improves the packets per second rate. It required a lot of change in
      the FW which implies many changes in the driver to support it. It is now also
      possible for the driver to use a separate MSI-X vector for Rx and Tx - this also
      add some to the complicity of this change.
      All things said - after this patch, practically all performance matrixes show
      Though Vladislav Zolotarov is not signed on this patch, he did most of the job
      and deserves credit for that.
      Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
  8. 08 Jul, 2009 1 commit
  9. 04 Jun, 2009 1 commit
  10. 02 May, 2009 1 commit
  11. 27 Apr, 2009 1 commit
    • Vladislav Zolotarov's avatar
      bnx2x: Separated FW from the source. · 0eae2a4d
      Vladislav Zolotarov authored
      >From now on FW will be downloaded from the binary file using request_firmware.
      There will be different files for every supported chip. Currently 57710 (e1) and
      57711 (e1h).
      File names have the following format: bnx2x-<chip version>-<FW version>.fw.
      ihex versions of current FW files are submitted in the next patch.
      Each binary file has a header in the following format:
      struct bnx2x_fw_file_section {
      	__be32 len;
      	__be32 offset;
      struct bnx2x_fw_file_hdr {
      	struct bnx2x_fw_file_section init_ops;
      	struct bnx2x_fw_file_section init_ops_offsets;
      	struct bnx2x_fw_file_section init_data;
      	struct bnx2x_fw_file_section tsem_int_table_data;
      	struct bnx2x_fw_file_section tsem_pram_data;
      	struct bnx2x_fw_file_section usem_int_table_data;
      	struct bnx2x_fw_file_section usem_pram_data;
      	struct bnx2x_fw_file_section csem_int_table_data;
      	struct bnx2x_fw_file_section csem_pram_data;
      	struct bnx2x_fw_file_section xsem_int_table_data;
      	struct bnx2x_fw_file_section xsem_pram_data;
      	struct bnx2x_fw_file_section fw_version;
      Each bnx2x_fw_file_section contains the length and the offset of the appropriate
      section in the binary file. Values are stored in the big endian format.
      Data types of arrays:
      init_data            __be32
      init_ops_offsets     __be16
      XXsem_pram_data         u8
      XXsem_int_table_data    u8
      init_ops             struct raw_op {
                                u8   op;
      			__be24 offset;
                              __be32 data;
      fw_version              u8
      >From now boundaries of a specific initialization stage are stored in
      init_ops_offsets array instead of being defined by separate macroes. The index 
      in init_ops_offsets is calculated by BLOCK_OPS_IDX macro:
      #define BLOCK_OPS_IDX(block, stage, end) \
             (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
      In addition to sanity check of array boundaries bnx2x will check a FW version.
      Additional checks might be added in the future.
      Signed-off-by: default avatarVladislav Zolotarov <vladz@broadcom.com>
      Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
  12. 21 Apr, 2009 1 commit
  13. 10 Apr, 2009 1 commit
    • Linus Torvalds's avatar
      Merge git://git.infradead.org/~dwmw2/firmware-2.6 · aeb537e9
      Linus Torvalds authored
      * git://git.infradead.org/~dwmw2/firmware-2.6:
        qla1280: Fix off-by-some error in firmware loading.
        Add README.AddingFirmware file. Basically telling people not to.
        firmware: Remove newly-added slicoss and sxg firmware images
        firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw
        ALSA: wavefront - Always use request_firmware()
        Remove fdump tool for av7110 firmware
        firmware: convert av7110 driver to request_firmware()
        Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card"
        Revert "fix modules_install via NFS"
      Add-add conflicts in firmware/WHENCE fixed manually
  14. 07 Apr, 2009 3 commits
    • David Woodhouse's avatar
      firmware: Remove newly-added slicoss and sxg firmware images · ed7331ed
      David Woodhouse authored
      These are available elsewhere (for example in the linux-firmware.git
      repository); they have no business being added to the kernel source
      We are only putting stuff in the firmware/ directory of the kernel
      source when it's extracted from long-standing drivers which used to
      include it directly.
      We didn't intend to open the floodgates to including megabytes of new
      firmware which was previously being distributed separately.
      Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 · bfe8ff32
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
        b44: Use kernel DMA addresses for the kernel DMA API
        forcedeth: Fix resume from hibernation regression.
        xfrm: fix fragmentation on inter family tunnels
        ibm_newemac: Fix dangerous struct assumption
        gigaset: documentation update
        gigaset: in file ops, check for device disconnect before anything else
        bas_gigaset: use tasklet_hi_schedule for timing critical tasklets
        net/802/fddi.c: add MODULE_LICENSE
        smsc911x: remove unused #include <linux/version.h>
        axnet_cs: fix phy_id detection for bogus Asix chip.
        bnx2: Use request_firmware()
        b44: Fix sizes passed to b44_sync_dma_desc_for_{device,cpu}()
        socket: use percpu_add() while updating sockets_in_use
        virtio_net: Set the mac config only when VIRITO_NET_F_MAC
        myri_sbus: use request_firmware
        e1000: fix loss of multicast packets
        vxge: should include tcp.h
      Conflict in firmware/WHENCE (SCSI vs net firmware)
    • David Woodhouse's avatar
      firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw · 43e79a44
      David Woodhouse authored
      Looks like we forgot to update WHENCE when we converted this driver.
      Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
  15. 06 Apr, 2009 3 commits
  16. 04 Apr, 2009 2 commits
  17. 03 Apr, 2009 6 commits
  18. 30 Mar, 2009 3 commits
  19. 13 Mar, 2009 1 commit
  20. 27 Feb, 2009 2 commits
  21. 13 Jan, 2009 1 commit
  22. 08 Jan, 2009 1 commit
  23. 07 Jan, 2009 1 commit
  24. 06 Jan, 2009 1 commit
  25. 05 Jan, 2009 2 commits